Installation; Environment Check - BenQ InstaShow X User Manual

Installation

This section will guide you on how to prepare the unit before its initial use.

Environment check

Before installing your InstaShow™ X kit, check the environmental conditions.
1. Do not install the device near heat sources like radiators or direct sunlight, or in a site with
excessive dust or humidity.
2. Ambient temperature conditions are listed as below. Maximum ambient temperature should be
+40°C or 104°F. Minimum ambient temperature should be +0°C or 32°F. Storage temperature
should be -10°C to +60°C (14°F to 140°F).
3. Humidity conditions are listed as below. For storage, the relative humidity should be 5% to 90%
(non-condensing). For operation, the relative humidity should be10% to 80% (non-condensing).
As the product works with different displays, the steps required to complete the installation may
vary according to the actual environment and your display specifications. Follow the procedures
below and refer to the specified sections for details.
1. Assemble the Host with the antennas. See
2. Connect the Host to the display and power properly. See
power on page 19
• Attaching the Host to the ceiling
• Attaching the Host to a ceiling mount
• Placing the Host on a table
• Installing the Host on the wall or trolley
3. Connect the Buttons to the desired devices and power properly. See
Button on page 22
4. Make sure that all the connected devices have been powered on. Press the source button of
the display and make sure that the HDMI source has been transmitted. See
Host on page 25 for details.
for details. Four installation methods are provided.
for details.
Assembling the Host on page 14
Connecting the HDMI cable and
for details.
Setting up and powering a
Pairing a Button and
13