Guide to Parts and Controls
Main unit
Receptor for the remote commander
HOME
Turn on the power.
Open the HOME menu.
Press to pause playback when Disc, iPod/USB,
BT Audio source is selected.
To resume playback, touch
Press and hold for more than 2 seconds to turn
off the unit.
When the unit is turned off:
– remote commander operation is not available.
– pictures from the rear view camera is not
displayed even if the shift lever is set to the R
(reverse) position.
ATT (attenuate)
Press and hold for a second, but less than 2
seconds, then rotate the volume control dial to
attenuate the sound.
PUSH SOURCE
Change the source. Each time it is pressed, it
displays a selectable source in a popup on the
current display.
VOICE
Press and hold to activate the voice command
function.
To assign the DSPL function to this button, select
[DSPL] in [SOURCE Key Func.] (page 19).
.
Volume control dial
Rotate to adjust the volume.
N-Mark
Makes a BLUETOOTH connection when touched
with an Android™ phone.
Disc slot
(disc eject)
USB port
AUX input jack
Reset button
Display/touch panel
5
GB