Table of Contents
Advertisement
Full Height Turnstile MPT-132
Configuring the pedestrian barrier
7
Configuring the pedestrian barrier
7.1
Safety
General
7.2
Parameter settings
46
Risk of injury due to inappropriate
configuration!
Incorrect configuration can cause injury.
– Only sufficiently qualified personnel authorized
and instructed by the user are allowed for the
configuration of the pedestrian barrier.
– Carry out all operating steps according to the
specifications of these Operating Instructions.
Some functions and parameters of the pedestrian barrier can be
adjusted via two blocks each equipped with 8 DIP switches. For a
precise description, see Page 47, Chapter 7.2.1 and Page 50,
Chapter 7.2.2.
NOTE!
Changes to DIP switch settings are adopted only
after the power supply to the pedestrian barrier has
been switched off and switched back on again.
Fig. 36: MBC 110 DIP switch block S1 and S2
1
DIP switch block S1
2
DIP switch block S2
WARNING
5817,5811EN / Version 02
Advertisement
Table of Contents
