Yamaha YZF-R125 Owner's Manual page 24

Instrument and control functions
Trip time meter "TRIP TIME"
3
ZAUM1311
This function records the elapsed time
of your current trip, or since it was last
reset. Trip time is displayed in "_h
_min" (hours and minutes).
TIP
 The trip time meter will automati-
cally reset 4 hours after the key
was last turned to "OFF".
 To manually reset the trip time me-
ter, push the "RESET" button for
two seconds.
odometer and tripmeter display
must be set to "ODO", otherwise
the tripmeter will be reset instead.
Oil change trip meter "DIST SERV"
ZAUM1449
This function shows the distance trav-
eled since your last oil service. It will re-
set when the oil change indicator is
reset.
Hi
Lo
However,
Hi
Lo
Oil change indicator "OIL"
ZAUM1450
This indicator flashes ("OIL SERV"
message will also appear) to indicate
that the engine oil should be changed.
It will come on at the initial 1000 km
(600 mi) service interval, 2000 km
(1200 mi) after that, and every 3000 km
(1800 mi) thereafter. After changing the
engine oil, be sure to reset the oil
change indicator.
To reset the oil change indicator, make
sure the odometer and tripmeter dis-
the
play is set to "ODO", then push the
"RESET" button for two seconds until
"OIL SERV" message flashes, and then
push and hold the "RESET" button for
15 seconds.
TIP
If the engine oil is changed before the
oil change indicator comes on (i.e. be-
fore the set oil service interval has been
reached), the indicator must be reset
for the next oil change to be indicated
at the correct time. In this case, make
sure the odometer and tripmeter is set
to "ODO", then select "DIST SERV" in
the multi-function display, then push
the "RESET" button for two seconds
until "DIST SERV" flashes, and then
push and hold the "RESET" button for
3-10
Hi
Lo
OIL