Yamaha YZF-R125 Owner's Manual page 23

TIP
 To reset the average fuel con-
sumption, push the "RESET" but-
ton for two seconds. However, the
odometer and tripmeter display
must be set to "ODO", otherwise
the tripmeter will be reset instead.
 After resetting the average fuel
consumption, "_ _._" is shown un-
til the vehicle has traveled a suffi-
cient distance.
Instantaneous fuel consumption "C
INS"
Hi
km/L
ZAUM1308
Instantaneous fuel consumption can
be displayed in "km/L" or "L/100 km",
or in "MPG" for the UK.
 "km/L": The distance that can be
traveled on 1.0 L of fuel under cur-
rent riding conditions.
 "L/100 km": The amount of fuel
necessary to travel 100 km under
current riding conditions.
 "MPG": The distance that can be
traveled on 1.0 Imp.gal of fuel un-
der current riding conditions.
TIP
If traveling at speeds under 10 km/h (6
mi/h), "_ _._" is displayed.
Instrument and control functions
Lo
L/100km
Average speed "AVE SPEED"
ZAUM1310
Average speed wll be displayed in
"AVE SPEED_ _._ km/h". For the UK,
when miles have been set, "AVE
SPEED __._ mph" will be displayed in-
stead.
 "AVE SPEED_ _._ km/h": Your av-
erage traveling speed in kilome-
ters per hour.
 "AVE SPEED_ _._ mph": Your av-
erage traveling speed in miles per
hour.
TIP
 The average speed display will re-
set automatically 4 hours after the
key was last turned to "OFF".
 To manually reset the average
speed display, push the "RESET"
button for two seconds. However,
the odometer and tripmeter dis-
play must be set to "ODO", other-
wise the tripmeter will be reset
instead.
3-9
Hi
Lo
3