Avery Dennison Monarch 9864 Quick Reference Manual page 9

06/08 Rev. AA
14. Guide the backing paper around the feed
roller (1) and guide pins (2) of the drawing
module to form an S shape (Fig. 1).
15. Replace the drawing module (Fig. 2).
When replacing, the
locking lever must point to the
right (half a revolution open).
Do not lock it until the drawing
module has been pushed in all the way!
16. Wrap the end of the backing paper
clockwise around the takeup reel (3) and
secure it with the clip (4) (Figs. 3 and 4).
17. Position the block bearing and the
pressure roller (5) in the middle of the
backing paper.
This keeps the backing paper in place
around the dispensing edge!
18. Lock the locking lever (Fig. 4).
QUICK REFERENCE
9864
1
2
3
4
7