Table of Contents
Advertisement
ATTACHMENT & OPERATION
Attachment and removal of the machine must always be performed on a firm level site. Ensure
bystanders are kept at a safe distance from the machines during the attachment process. The
procedure for attaching the machine to a Robocut is as follows;
Align the Robocut until its mounting plate (a)
is centred and parallel to the universal blade's
mounting plate (b).
Lower mounting plate (a) and move forwards
slowly until the two plates are in contact with
each other.
Raise the mounting plate (a) until the
universal blade's mounting plate is fully
connected.
Turn off the Robocut and remove the security
key from the controls.
Fix mounting plate (a) to mounting plate (b)
using the 6 screws in the location holes (c);
secure in place with self-locking nuts.
Connect the machines 2 'quick release' hoses
(d) to the Robocut's external connection
points (e).
Ensure that all connections are connected
correctly.
Start the Robocut and carefully operate the
controls to verify they correspond to their
correct functions.
Operating the Machine
◄ Angling of the blade to the left or to the right
is controlled by the use of switch 'f' indicated.
6
Advertisement
Table of Contents
