Table of Contents
Advertisement
Escutcheon
Shank
1.
Install the Faucet
NOTE: Handle orientation is designed to be on the right.
Partially thread the screws into the ring.
Insert the faucet through the mounting surface.
Extend the spray into the basin, from under the deck push the spray hose up until the
protective cap is against the shank, but no further.
Slide the washer up on the shank.
Thread the ring up the shank until it is 1/4 " (6 mm) from the underside of the sink.
Turn the ring so the screws align front and back.
Use a Phillips screwdriver to tighten the screws.
Push the pullout hose back until the spray is against the spout.
Kohler Co.
Washer
1/4" (6 mm)
5
Ring
1/4"
(6 mm)
1198298-2-C
Advertisement
Table of Contents
