Getting To Know The Settings - Philips AVENT SCF293 User Manual

Getting to know the settings

Note: Before you sterilise bottles and other items, clean them first.
Only place items in the steriliser which are suitable for sterilising� Do not sterilise items that
are filled with liquid, e.g. a teether with cooling fluid.
Sterilise
Auto
Dry
• Sterilise mode is for sterilising baby items�
• A sterilising cycle takes approximately 10 minutes�
• Heating up takes approximately 4 minutes and
sterilising takes approximately 6 minutes�
• Make sure to pour exactly 130 ml water directly into
the water reservoir of the base �
• Auto mode is for sterilising and drying baby items in
one go�
• An auto cycle takes approximately 40 minutes�
• When you use the "Auto" mode, the appliance starts
sterilising first and then drying will start automatically.
The sterilising cycle takes approximately 10 minutes,
and the drying cycle takes approximately 30 minutes�
• Make sure to pour exactly 130 ml water directly into
the water reservoir of the base �
• Dry mode is for drying baby items�
• A drying cycle takes approximately 30 minutes�
• When you dry baby items, do not add water to the
water reservoir of the base�
- 9 -