Table of Contents
Advertisement
PRECAUTIONS
The following are general safety precautions which personnel must understand and follow when using or
servicing this product. These precautions may or may not be included elsewhere in this manual.
USEAGE PRECAUTIONS
CAUTIONS
1. SensaTemp handpiece heaters and installed tips are hot when handpiece is powered on. DO NOT
touch either the heater or tip. Severe burns may result! Always store handpiece in the appropriate
cubby when not in use.
2. Always use this system in a well ventilated area. A fume extraction system such as those available
from PACE are highly recommended to protect personnel from solder flux fumes.
3. Exercise proper precautions when using materials (e.g., fluxes & solder paste). Refer to the Material
Safety Data Sheet (MSDS) supplied with each chemical and adhere to all safety precautions
recommended by the manufacturer.
4. The use of Safety Glasses is recommended when plating or machining.
NOTES
1. The solder collection chamber in the PACE Sodr-X-Tractor is made of glass. Never remove this
chamber using pliers. Breakage of the chamber may result. Always remove using the procedures
recommended by PACE in the associated handpiece manual.
2. The glass solder collection chamber in the PACE Sodr-X-Tractor is hot when the handpiece is in use.
When removing the chamber for cleaning, never touch the glass with bare hands. Allow the chamber
to cool before cleaning.
3. Disconnect the MicroChine handpiece from the power source or turn the power switch off before
installing or changing tools.
SAFETY
17
Advertisement
Table of Contents
