Table of Contents
Advertisement
HK-QC INSTALLATION INSTRUCTIONS
1.
Connect Hose Kit to unit by aligning the QC Coupling with the QC Fitting on the
unit. Connect the hose kit according to hose and unit labels: BLACK to WATER IN, RED
to WATER OUT and YELLOW to DRAIN. HOLD the coupling behind the sleeve allowing
the sleeve to move freely and PRESS firmly, until the sleeve retracts and clicks. The
"click" means that the QC Coupling is engaged onto the QC Fitting.
2. Connect WATER IN hose to water supply using hose connection, and sink
adapter (if needed).
3. Install WATER OUT line in drain, allowing for free drain conditions with an air space
around the opening.
4. Install DRAIN line in drain, allowing for free drain conditions.
5. Open water supply valve, and check for any water leaks in hose connections.
To release the coupling, Hold the Coupling as shown below, and push the sleeve for-
ward toward the fitting. The Coupling will release and the valve inside of the coupling
seal. Once off-site, use the fitting secured to the hose kit by the lanyard to break the
vacuum, and drain the hoses.
10
Advertisement
Table of Contents
