Dometic D18B Installation And Operating Manual page 23

D18B, D46B
7.4 Switching on and off
➤ To switch on and off, press the
7.5 Setting the temperature
To avoid food waste, note the following:
• Keep temperature fluctuation as low as possible. Only open the wine cooler as
often and for as long as necessary. Store the wine bottles in such a way that the
air can still circulate well.
• Adjust the temperature to the quantity and type of the wine bottles.
Setting the unit (°C or °F)
You can select whether the temperature is displayed in Fahrenheit or Celsius.
➤ Press the
and
✔ The unit is converted and the display shows the temperature in the selected unit.
Increasing and decreasing the temperature
The temperature can be set separately for the two zones.
➤ Press the
or
✔ The display flashes while you adjust the setting.
✔ Once you have set the temperature, the display shows the current temperature
of the interior.
I
NOTE
When using the wine cooler for the first time or if it has not been used for
a long time, the inner temperature could differ from the one you have
set. The temperature display flashes as long as this is the case. Once the
set temperature has been reached, the temperature display lights up
constantly.
Checking the set temperature
➤ Press the
or
✔ The set temperature is shown in the display for 5 seconds.
Then the display shows the current inner temperature again.
EN
button for at least 6 seconds.
buttons simultaneously for 2 seconds.
button to set the temperature.
button briefly.
Operation
23