Advertisement
Quick Links
Advertisement
Related Manuals for SuperCloset SUPERROOM
Summary of Contents for SuperCloset SUPERROOM
- Page 1 5x5 LED SUPERROOM...
-
Page 2: Welcome To The Family
SuperRoom. Please read through the entire instruction manual before you begin, including any and all instructions that come with the individual components. Lets take a look at the layout and components of your SuperRoom. GORILLA GROW TENT 1FT EXTENSION... - Page 3 Let’s start with unpacking the SuperCloset... Unpack the pallet and boxes that your SuperRoom came in and lay out in an organized pile. Once all items are unpacked, reference your quality assurance checklist to verify that you have all the contents of your SuperRoom.
- Page 4 2. Once your tent is assembled, double check to make sure that all fittings are installed properly including your ceiling support poles (image b). NO EXTENSION 7’ 11” 6’ 11” If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
- Page 5 Tighten the hose clamp securely and feed the open end of the ducting through the desired ducting port (image i). Tighten the dual-cinching ports around the ducting when done. If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
- Page 6 INLINE CARBON FILTER SET UP OPTION 1 DUCTING AIR FLOW CARBON FILTER SET UP OPTION 2 DUCTING INLINE AIR FLOW If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
- Page 7 3.Locate the Clip-On Active Air Fan (image f). Clip the fan to any one of the inside corner vertical poles. The fan is designed to provide circulation and air movement. If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
- Page 8 Make sure you have installed the spill tray included with your Gorilla Grow Tent prior to setting up the grow system in your tent If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
-
Page 9: Final Assembly
Pump into the Smart Plug (Hydro Only) Properly configured Power Strip Should look like this INTERNAL KIND LED WATER PUMP CIRCULATION FAN LIGHT (Hydro Only) INLINE AIR PUMP (Hydro Only) If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787... -
Page 10: Almost Done
7) Power Strip is off and plugged into the GFCI Protector. 3. After verifying all of the above, it’s time to turn on your SuperRoom. Turn the power strip switch to the ON position, and the system should spring to life before your very eyes! If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
Need help?
Do you have a question about the SUPERROOM and is the answer not in the manual?
Questions and answers