Advertisement
Quick Links
Advertisement
Related Manuals for SuperCloset SUPERSTAR
Summary of Contents for SuperCloset SUPERSTAR
- Page 1 SUPERSTAR SMART GROW CABINET...
-
Page 2: Welcome To The Family
SuperStar. Please read through the entire instruction manual before you begin, including any and all instructions that come with the individual components. Lets take a look at the layout and components of your SuperCloset. TOTAL GERMINATION KIT... - Page 3 CARBON AIR FILTER KIND LED LIGHT POWER STRIP AIR PUMP WATER PUMP INTERNAL CIRCULATION FAN SUPERPONICS 8 SOIL POTS SOIL POT TRAY 1/4” AIR TUBE HOSE AIR STONES 3” & 2” NET CUPS LOTUS NUTRIENTS SAMPLES Ph TESTING KIT 3-1 ADAPTER GFCI THERMOMETER/ TDS METER...
- Page 4 Let’s start with unpacking the SuperCloset... Carefully unbox your SuperCloset and remove all contents from inside the cabinet. Unpack the contents of the cabinet, as well as any components packaged inside the cabinet reservoir. Reference your Quality Assurance Checklist and verify that you have all of the needed components for your system.
- Page 5 4. Locate your Power Strip (image c). Locate the two screws on the center rear of the cabinet. Your power strip has holes on it that fit on these screws for mounting (image d). If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
- Page 6 Repeat steps 1-4 for both Carbon Filter/Fans. 5. Run the power cords for your Carbon Filter Fans through the nearest Elbow to the back of the cabinet. If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
- Page 7 Wire Hangers (image d). Raise the light to the desired height. 5. Run the power cord from the LED light through the nearest Elbow opening to the back of the cabinet. If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
- Page 8 8. Run the external probe to the outside of the cabinet, through the nearest Elbow. Make sure the probe is not touching any surface on the out side of the cabinet as this will provide false readings. If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
- Page 9 Power Cord out of the cabinet through the same Elbow through which you ran the T5 Light Strip Power Cord. Do not plug in the Air Pump yet. 7. Insert the 2” net cups. If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
- Page 10 Air Pump and Air Stones running at all times when the system is in use. If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
- Page 11 See (image e) for on/off positions. 12. Place the SuperPonics system and Air Pump inside the cabinet with the Drainage Tube towards the front. OPEN CLOSED If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
-
Page 12: Final Assembly
T5 CLONE CHAMBER KIND LED LIGHT WATER PUMPS INTERNAL CIRCULATION FAN AIR PUMP AIR PUMP AIR PUMP CARBON CARBON FILTER FAN #1 FILTER FAN #2 If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787... -
Page 13: Almost Done
7) Power Strip is off and plugged into the GFCI Protector. 6. After verifying all of the above, it’s time to turn on your SuperCloset. Turn the power strip switch to the ON position, and the system should spring to life before your very eyes! If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
Need help?
Do you have a question about the SUPERSTAR and is the answer not in the manual?
Questions and answers