Advertisement
Quick Links
Advertisement
Related Manuals for SuperCloset CloneRoom
Summary of Contents for SuperCloset CloneRoom
- Page 1 2x4 & 5x5 CLONEROOM...
-
Page 2: Welcome To The Family
CloneRoom. Please read through the entire instruction manual before you begin, including any and all instructions that come with the individual components. Lets take a look at the layout and components of your CloneRoom. GORILLA GROW TENT 1FT EXTENSION CARBON AIR FILTER T5 4’... - Page 3 Let’s start with unpacking the CloneRoom... Unpack the pallet and boxes that your CloneRoom came in and lay out in an organized pile. Once all items are unpacked, reference your quality assurance checklist to verify that you have all the contents of your CloneRoom.
- Page 4 2. Once your tent is assembled, double check to make sure that all fittings are installed properly including your ceiling support poles (image b). NO EXTENSION 7’ 11” 6’ 11” If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
- Page 5 Tighten the hose clamp securely and feed the open end of the ducting through the desired ducting port (image i). Tighten the dual-cinching ports around the ducting when done. If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
- Page 6 INLINE CARBON FILTER SET UP OPTION 1 DUCTING AIR FLOW CARBON FILTER SET UP OPTION 2 DUCTING INLINE AIR FLOW If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
- Page 7 The fan is designed to provide circulation and air movement. Clone Rack 1. Locate the clone rack(s). Unbox, assemble and place in your Clone Room If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
- Page 8 CloneRoom Layout 2x4 Layout Top View 5x5 Layout Top View If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
- Page 9 Pump. Run the Air Pump Power Cord out of the cabinet through the same Elbow as the T5 Light Strip Power Cord. Do not plug in the Air Pump yet. If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
-
Page 10: Final Assembly
Properly configured Power Strip Should look like this INTERNAL CIRCULATION FAN LIGHT 2x4 CloneRoom INLINE PUMP INTERNAL CIRCULATION FAN LIGHTS 5x5 CloneRoom INLINE PUMPS If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787... -
Page 11: Almost Done
5) Power Strip is off and plugged into the GFCI Protector. 6. After verifying all of the above, it’s time to turn on your CloneRoom. Turn the power strip switch to the ON position, and the system should spring to life before your very eyes! If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
Need help?
Do you have a question about the CloneRoom and is the answer not in the manual?
Questions and answers