Advertisement
Quick Links
Advertisement
Related Manuals for SuperCloset SUPERBOX
Summary of Contents for SuperCloset SUPERBOX
- Page 1 SUPERBOX SMART GROW CABINET...
-
Page 2: Welcome To The Family
SuperBox. Please read through the entire instruction manual before you begin, including any and all instructions that come with the individual components. Lets take a look at the layout and components of your SuperCloset. GROW LIGHT CARBON AIR FILTER... - Page 3 CARBON AIR FILTER CFL GROW LIGHT POWER STRIP AIR PUMP WATER PUMP INTERNAL CIRCULATION FAN SUPERPONICS 8 SOIL POTS SOIL POT TRAY 1/4” AIR PUMP TUBING AIR STONES 3” NET CUPS LOTUS NUTRIENTS STARTER KIT Ph TESTING KIT SHOT MEASURING GLASS GFCI TDS METER NET TRELLIS, HOOKS, TIES...
- Page 4 Let’s start with unpacking the SuperCloset... Carefully unbox your SuperCloset and remove all contents from inside the cabinet. Unpack the contents of the cabinet, as well as any components packaged inside the cabinet reservoir. Reference your Quality Assurance Checklist and verify that you have all of the needed components for your system.
- Page 5 Ideally the fan will blow air across the top of the plants. Thread the power cord through the upper hole found on the lower interior of the cabinet (same as the light power cord). If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
- Page 6 Air Pump and Air Stones running at all times when the system is in use. If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
- Page 7 Valve should always be in the CLOSED position, NOTE: unless you are draining your reservoir. OPEN CLOSED If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
-
Page 8: Final Assembly
Once the Smart Plug is plugged in, plug in the Water Pump (Hydro Only). Properly configured Power Strip Should look like this CARBON FILTER INTERNAL AIR PUMP WATER PUMP GROW LIGHT CIRCULATION FAN (Hydro Only) (Hydro Only) If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787... -
Page 9: Almost Done
7) Power Strip is off and plugged into the GFCI Protector. 6. After verifying all of the above, it’s time to turn on your SuperCloset. Turn the power strip switch to the ON position, and the system should spring to life before your very eyes! If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
Need help?
Do you have a question about the SUPERBOX and is the answer not in the manual?
Questions and answers