Advertisement
Quick Links
Advertisement
Related Manuals for SuperCloset SUPERLOCKER
Summary of Contents for SuperCloset SUPERLOCKER
- Page 1 SUPERLOCKER SMART GROW CABINET...
-
Page 2: Welcome To The Family
SuperLocker. Please read through the entire instruction manual before you begin, including any and all instructions that come with the individual components. Lets take a look at the layout and components of your SuperCloset. SUPERCLONER CARBON AIR FILTER... - Page 3 CARBON AIR FILTER KIND LED LIGHT POWER STRIP AIR PUMP WATER PUMP INTERNAL CIRCULATION FAN SUPERPONICS 8 SOIL POTS SOIL POT TRAY 1/4” AIR PUMP TUBING AIR STONES 3” & 2” NET CUPS LOTUS NUTRIENTS STARTER KIT Ph TESTING KIT SHOT MEASURING GLASS GFCI THERMOMETER/...
- Page 4 Let’s start with unpacking the SuperCloset... Carefully unbox your SuperCloset and remove all contents from inside the cabinet. Unpack the contents of the cabinet, as well as any components packaged inside the cabinet reservoir. Reference your Quality Assurance Checklist and verify that you have all of the needed components for your system.
- Page 5 (upper chamber) in this manner (image e). Once attached, run the T5 power cord through the nearest elbow of the back of the cabinet. If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
- Page 6 This will read the outside (”out”) temperature while the digital readout module will measure the inside temperature and humidity. If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
- Page 7 T5 to each side of your cabinet, via the magnetic backing, in the main growing chamber (image e). Run cords through the nearest Elbow opening. If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
- Page 8 Elbow through which you ran the T5 Light Strip Power Cord. Do not plug in the Air Pump yet. 7. Insert the 2” net cups. If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
- Page 9 Air Pump and Air Stones running at all times when the system is in use. If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
- Page 10 Valve should always be in the CLOSED position, NOTE: unless you are draining your reservoir. OPEN CLOSED If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
-
Page 11: Final Assembly
Properly configured Power Strip Should look like this T5 SIDE LIGHTS KIND LED LIGHT T5 CLONE CHAMBER WATER PUMP INTERNAL CIRCULATION FAN AIR PUMP AIR PUMP CARBON FILTER FAN If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787... -
Page 12: Almost Done
7) Power Strip is off and plugged into the GFCI Protector. 6. After verifying all of the above, it’s time to turn on your SuperCloset. Turn the power strip switch to the ON position, and the system should spring to life before your very eyes! If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
Need help?
Do you have a question about the SUPERLOCKER and is the answer not in the manual?
Questions and answers