Victron energy VBC-HV Manual page 11

3.3 Historic data
The VBC-HV will keep track of historical data to enable you to get more
information about the state and the past use of the batteries.
Where to find the "Historical data" menu
3.3.1
Battery Monitor
157V -0.5A
Battery voltage
157.40V
Historic data
[Press enter]
3.3.2 Historical data explained
Name
Deepest The deepest discharge in Ah.
discharge
Depth last disch. The depth of the last discharge in Ah. This value will be reset to 0
when the State of Charge reaches 100% again.
Average The average discharge over all the cycles counted
discharge
Number of cycles Every time the battery is discharged below 65% of its rated
capacity and charged back to at least 90%, one cycle is counted.
Full discharges The number of times the battery has been discharged to a 0%
state of charge.
Cumulative Ah Records the total energy consumed over all charge cycles.
Last full charge The time that has elapsed since the battery was last fully charged.
Maximum voltage Maximum measured voltage. Can be used to check for faulty
chargers and alternators.
Minimum voltage Lowest measured voltage. Can be used to check if the batteries
have been excessively discharged.
Step 1) Press "Enter" to enter the VBC-HV
99%
Step 2) Press "▼" to scroll through the
Step 3) Press "Enter" to enter the "Historic
Historic data
Description
menu.
menu until you see „Historic data".
data" menu
Unit
Amp hours.
Amp hours.
Amp hours.
Amp hours.
Days.
Volts.
Volts.
7