Table of Contents
Advertisement
Quick Links
Models Covered:
DataPort SecureDock with AES 128 (USB+SATA)
DataPort SecureDock with AES 256 (USB+SATA)
DataPort SecureDock with AES 128 (FireWire800+USB+SATA)
DataPort SecureDock with AES 256 (FireWire800+USB+SATA)
• Hardware-based AES 128-bit or 256-bit Encryption – Offers affordable military-grade AES
128-bit or 256-bit data protection that encrypts the entire hard drive–including boot sector,
OS, temp, and swap files.
• Meets Industry Standards – All CRU Secure 256-bit product architecture and encryption
engine designs meet FIPS140-2, level 3 per certification number 1471, and all CRU AES 256-
bit security chips are NIST & CSE validated (FIPS PUB 197).
• Easy-to-Use Security – A Security Key stored separately from the unit makes the DataPort
SecureDock less vulnerable to attack if the unit is lost or stolen. No PINs or passwords are
needed.
• DataPort 10 Design – A rugged metal design that incorporates a patented temperature
controlled cooling system for ultimate data protection.
A6-010-0003 Revision: 2.2
DataPort SecureDock
User Manual
™
Advertisement
Table of Contents
Related Manuals for CRU Dataport SecureDock
Summary of Contents for CRU Dataport SecureDock
- Page 1 NIST & CSE validated (FIPS PUB 197). • Easy-to-Use Security – A Security Key stored separately from the unit makes the DataPort SecureDock less vulnerable to attack if the unit is lost or stolen. No PINs or passwords are needed.
- Page 2 1.1 Box Contents 1.1 Box Contents The following list contains the items that are included in the 1.2 Identifying Parts of your DataPort SecureDock complete configuration for this device. Depending on which configuration and accessories you purchased, the package may 1.3 Warnings and Notices...
- Page 3 Proper grounding is strongly recommended to prevent electrical damage to the enclosure or other b. Connect the DataPort SecureDock to a power outlet with the connected devices, including the computer host. Avoid all dramatic included AC Adapter.
- Page 4 Properties Box and selecting Initialize Disk. 3.1.3 Mounting and Unmounting Volumes e To format the drive, right-click the Drive Properties Box and If the hard drive installed in the DataPort SecureDock was previ- select Format. ously formatted with the correct Security Key inserted into the Mini-USB Security Key Port on the face of the receiving frame, f.
- Page 5 • The encryption key must be installed prior to powering on the back on, even if you have not turned your computer off. If the unit DataPort SecureDock for the data to be decrypted on the drive. If is on, power it off and insert the correct Security Key into the the key is externally connected to the Mini-USB Security Key Port Mini-USB Security Key port on the front of the carrier.
- Page 6 Security Key still works in your Compliance EMI Standard: FCC Part 15 Class B, CE DataPort SecureDock. If it does not, please contact Technical EMC Standard: EN55022, EN55024 FIPS: FIPS 140-2, FIPS PUB 197 Support.
Need help?
Do you have a question about the SecureDock and is the answer not in the manual?
Questions and answers