Casio PhoneMate TC-540 Owner's Manual page 25

BASE
AUTODIAL
PAGE
18 18 18 18 18
STORING AUTODIAL
NUMBERS
You may store up to 10 of your most frequently
dialed numbers in autodial memory. Autodial
station numbers can be up to 16 digits each. To
store autodial numbers, the AC ADAPTER must
be connected correctly. Numbers may only be
stored at the base unit.
1
STORE
Press
handset cradle).
2
Enter one of the telephone numbers you
want to store in the autodial memory by
dialing it on the keypad. You will hear a
confirmation tone after entering each digit.
3
AUTODIAL
Press
AUTODIAL
OUTGOING MESSAGE
RECORD
CHARGING
MEMO/CONV
LINE IN USE
ABC
1 2
(under the lid in the
STORE
.
STORE
CHECK
TIME
PAGE
DEF AUTODIAL
3
4
Press a keypad number (0-9) as the
autodial location for that number.
5
STORE
Press .
6
Repeat steps 1-5 to store up to 10
autodial numbers.
7
To exit the programming mode any time
during programming, press
wait 10 seconds. You will hear a double
beep when the TC-540 exits the
programming mode.
8
Write the names and telephone numbers
of the people whose numbers you have
stored on the TC-540's autodial index
(located in the handset cradle.)
NOTES:
To relocate your TC-540, unplug the AC ADAPTER from the
wall outlet and install the unit at a new location. If a 9 volt
battery is installed, the autodial memory, message count, and
time/day stamp will be saved for 1 hour during a power failure.
You can store important emergency numbers in autodial
memory (police, fire, medical 911 for example) but Casio
Phonemate assumes no responsibility for this feature. When
programming and/or making test calls to emergency numbers,
remain on the line and briefly explain to the dispatcher the
reason for the call. Perform such activities in off peak hours,
such as early morning or late evenings.
1
STORE
or