REMOTE
REMOTE OPERATION
PAGE
28 28 28 28 28
TO CHECK THE
REMOTE ACCESS CODE
1
SET/CHECK CODE
Press
SET/CHECK
CODE
2
A synthesized voice will announce the
remote access code.
REMOTE MESSAGE
RETRIEVAL
Call the answering machine from most cellular,
pay, or touchtone telephones. After entering the
remote code, the TC-540 will automatically
access messages in MAILBOX 1 unless another
mailbox is selected. To select another mailbox,
*
press
and a mailbox number (2 or 3).
1
ENTER
your 3-digit access code
approximately two seconds after the
outgoing message begins.
TC-540 does not respond when you enter your code,
try again after the beep.
2
Depending on the number of messages,
you will hear:
You have four
messages in
MAILBOX 1.
once.
TIME
4-7-6
NOTE: If the
You have no
messages in
MAILBOX 1.
3
Your messages will be played.
4
After all messages have played you will
hear, "End of messages." Select another
option or hang up.
cancel Message Playback. The TC-540 will
automatically save all messages, unless you choose
to erase them.
REMOTE VOICE MENU
After message playback, the TC-540 lists the
remote menu. You can select a remote option
for the selected mailbox or hang up to save
messages.
Enter
Enter
Enter
4
Enter
to record a message.
5
Enter
to record a greeting.
*
Enter
to select mailbox.
(Press 1, 2 or 3 to
select a mailbox.)
NOTE: Hang up anytime to
1
to replay.
2
to save.
3
to erase.