Page 2
2. Position the base so that the holes are aligned with the pegs, and push the pieces firmly together. (The grooves on the side piece and the smooth surface of the base should both be facing in.) Use the Allen wrench and 2 long screws to secure the side piece to the base. (grooves) 3.
Page 3
4. Insert 2 pegs into the baseboard. Position the remaining side piece so that the holes align with the pegs and the wire racks align with the grooves. Carefully push the side piece into place, adjusting the shelves to fit into the grooves as needed. Fasten with 2 long screws, using the Allen wrench to tighten the screws securely.
Page 4
6. Stand the center upright. Use 2 short screws to attach each paint tray. Tighten with the Allen wrench. 7. Attach the clips to the top of the easel. Now your Spacesaver Mobile Art Center is ready for your classroom! Notes: •...