Lakeshore HH364 Assembly Manual

Read & Relax Book Station Assembly Guide
Your new book station provides students with a cozy space to read—as well as a handy book storage space.
Follow these instructions to assemble the unit. You will need a standard screwdriver. All other tools and hardware
are provided. Begin by checking the list below to make sure you can identify the components. While it is possible
for one person to assemble this unit, we strongly recommend that you work with a partner.
What's Included
side panels (2)
Assembly Instructions
Place 4 dowels in the inner pre-drilled holes on top of
1
the base (as shown). Turn the base on its side. Position
the short dividers so that the rounded edges face the
front of the unit. Secure each divider with 2 screws. (If
some of the dowels fit loosely in their holes, we suggest
using a drop of white glue to help hold them in place.)
©2010 Lakeshore
(800) 428-4414
www.lakeshorelearning.com
back
short
dividers (2)
back
panel
WARNING:
ADULT ASSEMBLY REQUIRED—
contains hardware that, before assembly, can pose a choking
hazard to children under the age of 3 years. Care should be
taken when unpackaging and assembling this product.
seat
base
seat
cushion
Assembly note: When assembling the unit, make sure the
rounded edges of the base, seat, and short dividers are
always facing the front.
This product
seat
dowels (22)
Allen
wrench
(continued on back)
Made in China and U.S.A.
bolts (10)
k/d fittings
(10)
screws (8)
HH364
Ages 3+