Advertisement
Quick Links
Heavy-Duty Locking Storage Cabinet
Your new storage cabinet is simple to assemble. You'll need a Phillips screwdriver and a rubber mallet; we've
provided all the other hardware and tools. You can assemble the cabinet on your own, but it will be easier if
you have another adult assist you. Use the pictures below to identify the contents before you begin.
What's Included
top shelf
adjustable
shelves (3)
boards (2)
upper
left
lower
back panels (2)
doors (2)
Assembly Instructions
long
bolt
barrel
nuts
© 2010 Lakeshore
(800) 428-4414
www.lakeshorelearning.com
center shelf bottom shelf
brace
kick plates (2)
right
sidewalls (2)
pilot
holes
WARNING:
ADULT ASSEMBLY REQUIRED—
contains hardware that, before assembly, can pose a choking
hazard to children under the age of 3 years. Care should be
taken when unpacking and assembling this product.
long bolts (20)
"A" screws (30)
hinge screws (24)
magnetic catch
screws (4)
lock catch
screws (6)
handle screws (4)
hinge
1. Insert 3 large pegs into the pre-drilled
barrel
holes
nuts
2. Hold a sidewall on its edge, as shown
3. Push a shelf together with the sidewall.
large
pegs
finished
edges
This product
Hardware
barrel nuts (20)
hinges (6)
magnetic
catch (2)
shelf brackets (12)
lock catch (2)
handles (2)
holes on each side of the top, center,
and bottom shelves.
at left, with hinge holes toward floor.
Position the shelves so that the pegs
match up with the holes in the sidewall,
with the finished edges against the floor
and grooves facing up (see illustration).
Insert 2 barrel nuts into the pilot holes
on the bottom of the shelf, closest to
the sidewall. Turn each barrel nut so
that its hole aligns with the bolt hole in
the edge of the shelf, as shown in the
inset at left. Then, use the Allen wrench
and 2 long bolts to secure the shelf.
Repeat with the other two shelves.
small pegs (14)
large pegs (26)
keys (4)
Allen wrench
DG218
Made in China
Advertisement
Summary of Contents for Lakeshore DG218
- Page 1 ADULT ASSEMBLY REQUIRED— This product contains hardware that, before assembly, can pose a choking DG218 © 2010 Lakeshore hazard to children under the age of 3 years. Care should be (800) 428-4414 taken when unpacking and assembling this product. www.lakeshorelearning.com...
- Page 2 4. Insert 8 small pegs into the edges of the upper back panel. Insert 6 small pegs into the edges of the lower back panel. Slide the back panels into the grooves. 5. Insert 2 large pegs into each brace board. Position brace board at back of unit and insert barrel nut, turn- ing to align with bolt hole.
- Page 3 7. Turn the cabinet right-side-up. Complete the shelves: a) Position the shelf brackets at the heights you desire, placing 3 pairs on each sidewall. b) Attach each lock catch to the underside of the center shelf, using the 6 lock catch screws. c) Secure 2 magnetic catches to the top shelf using 2 magnetic catch screws for each.
- Page 4 hinge screw hinge screw “A” screws 9. Hang the doors: a) Insert 1 hinge screw into each of the 3 groups of pilot holes in one sidewall, matching the posi- tion shown in inset A above. Twist the screws only part way b) Hook the lower notches of the 3 door hinges over the 3 hinge screws, as shown in inset B.