ORiNG IUSB-9000 Series Quick Installation Manual

ORing Industrial Networking Corp.
USB
SERVER
Q I
uick nstallation
I N D U S T R I A L

Introduction

IUSB-9000 Series is a network-enabled USB hub. It is a powerful remote
networking solution to utilize, making it easy to connect USB devices anywhere
through the network, while eliminating the need for locally-attached host Pcs.
9000 Series provides four USB 2.0 ports, which deliver the same Plug and Play
experience as onboard USB ports. Software drivers are loaded onto a host PC or
server, enabling remote devices to communicate with the host PC, without changing
existing application software. Peripheral devices can be centrally managed and
monitored from a remote server or PC via an IP address.
compatible with Bulk or Interrupt type USB devices such as bar-code scanners,
printers, fingerprint scanners, mice, pole displays, card readers, USB flash drives,
web camera, and more. In addition, bundled powerful Windows utility USB-Tool can
be used to discovery, mapping USB servers in the LAN and WLAN. USB-Tool also
provides security functions, like Access IP list control and friendly wizards for group
IP setting and firmware upgrade. User can also use web interface to manage
9000 Series remotely from internet.
Features
Data rates up to 480 Mbps per USB port
500 mA downstream power per USB port
USB 1.0, 1.1, 2.0 Support
Event warning bt relay output
USB Hub support to extend device
Static/DHCP IP address per unit
Multiple units supported per server
Powerful configuration Windows utility USB-Tool
10/100Base-TX Ethernet support
Rigid IP-30 housing design
Din-Rail and panel mounting enabled

Power Connection Guide

PWR-2 1A@24V PWR-1 DC12-48V
V2+ V2- V1+ V1-
V+ V-
Power
V- V+
Supply
12-48 VDC
Warning
Device
+24V GND
Power
Supply
Q I G
IUSB-9000 Series
IUSB-9000 Series
G
uide

Specifications

ORing USB Server Model
IUSB-
Physical Ports
10/100Base-T(X) Port in RJ-45
Auto MDI/MDIX
USB Ports
IUSB-9000 Series is also
Connector
Operation Mode
WLAN Feature
Operating Mode
IUSB-
Antenna Connector
Radio Frequency Type
Modulation
Frequency Band
Transmission Rate
Transmit Power
Receiver Sensitivity
Encryption Security
Networking
OS support
TCP/IP
Browser

LED indicators

Power indicator
Ready indicator
WLAN indicator
Relay indicator
10/100TX RJ-45 port indicator
G USB indicator
Frame Ground
Fault contact
Relay
Power
Power
Adapter
Input power
12-48 VDC
Power consumption (Typ.)
Power Power
Physical Characteristic
Supply Supply
12-48 VDC 12-48 VDC
Enclosure
Dimension (W x D x H)
Weight (g)
Environmental
Storage Temperature
Operating Temperature
Operating Humidity
IUSB-9041 IUSB-9041-WG
1 1
USB 2.0 x 4
1.0, 1.1, 2.0 support
-
Client mode
- Reverse SMA
- DSSS
IEEE802.11b: CCK, DQPSK, DBPSK
-
IEEE802.11g: OFDM with BPSK, QPSK,
16QAM, 64QAM
America/FCC: 2.412~2.462 GHz (11 channels
-
Europe CE/ETSI: 2.412~2.472 GHz (13 channels)
IIEEE802.11b: 1/ 2/ 5.5/ 11 Mbps
-
IEEE802.11g: 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54 Mbps
- IEEE802.11b/g: 18dBm
-81dBm @ 11Mbps, PER< 8%; -64dBm @ 54Mbps,
-
PER< 10%
WEP: (64-bit ,128-bit key supported)
WPA:
- WPA2 : 802.11i(WEP and AES encryption)
PSK (256-bit key pre-shared key supported)
TKIP encryption
Windows 2000, XP, 2003, Vista
IP, ICMP, ARP, RARP, TCP, UDP, HTTP
IE 6.0 or above
Green: Power LED x3
Green for ready
- Green : WLAN Link/Act.
Amber for fault relay
Green for port Link/Act. Amber for data transmitted.
Green for USB port activated
Relay output to carry capacity of 1A at 24VDC
Triple DC inputs. 12 ~ 48 VDC on 6-pin terminal block and power jack
4 Watts 6 Watts
IP-30
26.1(W) x 94.9(D) x 144.3 (H) mm (1.30 x 3.74 x5.68 inch)
386 g 398 g
-40 to 85 C (-40 to 185 F) o o
o o
-10 to 60 C (14 to 140 F)
5% to 95% Non-condensing
PRINTED ON RECYCLED PAPER
Industrial USB Server
Regulatory approvals
EMI
FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock
IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty 5 years
USB Tool
)
In practical operation of IUSB-9000 Series , users can access USB devices through the
TCP/IP network remotely without the connecting USB device locally. For logistic application,
zero clients can avoid the central control PC been damaged and reduce total investment.
Windows utility (USB-Tool) is supported for configuration and management remotely. This
utility is very helpful for you to manage and monitor all of the USB servers on the network.
USB remote connectivity
USB-Tool : Monitoring and Configuration interface
Version 1.1
Quick Installation Guide