Download Print this page
Generac Power Systems 130 kW Overview
Generac Power Systems 130 kW Overview

Generac Power Systems 130 kW Overview

130 kw standby generators liquid-cooled engine generator sets

Advertisement

Quick Links

GENERAC
INCLUDES:
• Generac Naturally Aspirated
Gaseous Fueled 6.8L Engine
• Two Line LCD Tri-lingual
Digital Nexus™ Controller
• Isochronous Electronic Governor
• Closed Coolant Recovery System
• Smart Battery Charger
• UV/Ozone Resistant Hoses
• ±1% Voltage Regulation
• Natural Gas or LP Operation
• 2 Year Limited Warranty
• UL 2200 Listed
FEATURES
INNOVATIVE DESIGN & PROTOTYPE TESTING
¡
GENERAC'S success in "IMPROVING POWER BY DESIGN." But it
doesn't stop there. Total commitment to component testing, reliability
testing, environmental testing, destruction and life testing, plus testing
to applicable CSA, NEMA, EGSA, and other standards, allows you to
choose GENERAC POWER SYSTEMS with the confidence that these
systems will provide superior performance.
TEST CRITERIA:
¡
 PROTOTYPE TESTED
SYSTEM TORSIONAL TESTED
STANDBY GENERATORS
®
Liquid-Cooled Engine Generator Sets
are key components of
NEMA MG1-22 EVALUATION
MOTOR STARTING ABILITY
Model QT130 (Bisque) - 130 kW 60Hz
Meets 2010 EPA Emission Regulations
Meets CA/MA emissions requirement with optional catalyst
SOLID-STATE, FREQUENCY COMPENSATED VOLTAGE REGULATION.
¡
This state-of-the-art power maximizing regulation system is standard on
all Generac models. It provides optimized FAST RESPONSE to changing
load conditions and MAXIMUM MOTOR STARTING CAPABILITY
by electronically torque-matching the surge loads to the engine. An
unequalled ±1% voltage regulation.
SINGLE SOURCE SERVICE RESPONSE
¡
network provides parts and service know-how for the entire unit, from the
engine to the smallest electronic component.
¡
GENERAC TRANSFER SWITCHES.
synonymous with GENERAC POWER SYSTEMS. One reason for this
confidence is that the GENERAC product line includes its own transfer
systems and controls for total system compatibility.
®
130 kW
Standby Power Rating
from Generac's extensive dealer
Long life and reliability are

Advertisement

loading
Need help?

Need help?

Do you have a question about the 130 kW and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Generac Power Systems 130 kW

  • Page 1 Long life and reliability are SYSTEM TORSIONAL TESTED MOTOR STARTING ABILITY   synonymous with GENERAC POWER SYSTEMS. One reason for this confidence is that the GENERAC product line includes its own transfer systems and controls for total system compatibility. ®...
  • Page 2 ALTERNATOR OUTPUT LEADS 3-PHASE/1-PHASE 6/4 wire BORE 3.55 BEARINGS Sealed Ball STROKE 4.17 COUPLING Gear Drive COMPRESSION RATIO LOAD CAPACITY (STANDBY RATING) 130 kW INTAKE AIR SYSTEM Naturally Aspirated EXCITATION SYSTEM Brushless VALVE SEATS Hardened LIFTER TYPE Hydraulic VOLTAGE REGULATION GOVERNOR SPECIFICATIONS TYPE...
  • Page 3: Operating Data

    Generac Standby Generator - 130 kW ® ® OPERATING DATA KW RATING (LP/NG) ENGINE SIZE 6.8 Liter V-10 GENERATOR OUTPUT VOLTAGE/KW - 60Hz CB Size 120/240V, 1-phase, 1.0 pf 120/208V, 3-phase, 0.8 pf 120/240V, 3-phase, 0.8 pf 277/480V, 3-phase, 0.8 pf...
  • Page 4 INTERCONNECTIONS QT130 CIRCUIT BREAKER WIRE AND CONDUIT SIZE VOLTS CB AMPS LUG SIZE 240 1 Ø (3) 2/0 to 400 mcm 240 3 Ø (3) 2/0 to 400 mcm 208 3 Ø (3) 2/0 to 400 mcm 480 3 Ø (1) 600 mcm or (2) 1/0 to 250 mcm NEXUS™...
  • Page 5: Installation Layout

    INSTALLATION LAYOUT QT130 ® Generac Power Systems, Inc. • S45 W29290 HWY. 59, Waukesha, WI 53189 • generac.com ©2011 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice. Bulletin 0188700SBY-C / Printed in U.S.A. 02/18/11...

This manual is also suitable for:

Qt130