EDAN iSE Series Service Manual page 40

iSE Series Electrocardiograph Service Manual Electrocardiograph Disassembly
Power off the electrocardiograph. Disconnect the power adapter.
Take out the battery.
Detach 6 cover screws from the lower casing by the M3 Philips
screwdriver.
Open the buckle between the upper casing and lower casing by the
pry bar.
Open the casing. Check inside.
Figure 6-1 Pull the button left and the battery will pop up.
Figure 6-2 Screws that need to be detached from the lower casing
- 33 -