iSE Series Electrocardiograph Service Manual
Degree
of
safety
application in the presence
of flammable gas:
Working mode:
EMC:
3.1.3 Environment Requirements
Temperature:
Relative Humidity:
Atmospheric Pressure:
3.1.4 Power Supply Specifications
Mains supply
Li-ion Battery
of
Equipment not suitable for use in the presence of flammable
gas
Continuous operation
CISPR 11, Group 1, Class B
Transport & Storage
-20º C (-4º F) ~ +55º C (+131º F)
15% RH~95% RH
Non-Condensing
70kPa ~106kPa
Operating Voltage = 100 V-240 V~
Operating Frequency = 50 Hz / 60 Hz
Power Adapter: Output Voltage = 19 V, Output Current = 2.53 A
Input current=1.1 A
Rated Voltage / Typical Capacity = 15.2 V / 3550 mAh
When the battery is fully charged, iSE can work (without printing)
continuously at least 8 hours.
100% recharge time: ≤ 5 hours
90% recharge time: < 4 hours
- 13 -
Working
+5º C (+41º F) ~ +40º C (+104º F)
15% RH~95% RH
Non-Condensing
70kPa ~106kPa
Overview