Scandomestic SKS 331 W User Manual page 29

Table of Contents

Advertisement

Available languages

Available languages

4 Carefully lie down the rear of cabinet
on a soft pad. Remove two leveling feet
first. Then unscrew the door hinge and
left foot base.
Caution ! If there is a screw at left front
corner, remove it before install hinge.
5 Unscrew and remove the bottom hinge
pin, turn the bracket over and replace
it.
6 Install the hinge at left side and foot
base at right side. Then screw two leve-
ling feet with their original parts.
7 Unscrew top hinge pin and mounte it to
left hole.
8 Stand up the unit and put the door on
the bottom hinge. Make sure the bot-
tom hinge core is inserted in the door
hole. Then fit upper hinge with the
door. Before tightly fix the upper hinge,
try to open the door to check whether
the cabinet is sealed well. Finally, screw
the hinge cover with hinge .
9 Detach the Fridge and the Freezer door
gaskets and then attach them after ro-
tating.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sks 331 x

Table of Contents