Audio - Panasonic AW-UE20KP Operating Instruction

Audio

Click [Setup] > [Image/Audio] > [Audio]
Click [Set] to enable the configuration.
 Audio
Audio
[Off, On]
Select On or Off to enable or disable audio.
[Note]
1. If you switch audio On or Off during IP streaming, audio skipping might occur.
2. When Audio is On, RTMP transmission may not start. (Such an occasion arises when the server to which RTMP
transmission is delivered requires audio transmission)
3. If you change Audio from On to Off during RTMP transmission, RTMP transmission may stop.
Input Type
[Mic, Line]
Mic Set the microphone input.
Line Set the line input.
Volume Level
[–36 dB ～ +12 dB]
Set the volume level of audio output.
This is only enabled when [Audio] is set to [On].
Plugin Power
[Off, On]
Turn the plugin power for the audio off/on.
This is only enabled when [Audio] is set to [On].
81