Panasonic AW-UE20KP Operating Instruction page 108

Upgrading the firmware (Firmware file)
Click [Setup] > [Maintenance] > [Product Info.].
1. Download the latest software to your personal computer.
[Note]
Keep the maximum combined number of characters to be used for the name of the directory in which the software
will be stored and for the name of the software which has been downloaded to less than 250 characters.
2. Click the [Browse] button, and specify the downloaded software.
3. Click the [Execute] button. The [Execute] button will be enabled when the direction of software has been select.
4. The software upgrade check screen is displayed.
After upgrading the software version, be absolutely sure to delete the temporary Internet files.
[Note]
 An upgrade progress bar appears after you click the [Execute] button, and the process will take about 2 minute.
 Use the personal computer on the same subnet as the camera to upgrade the software version.
 Before using the version upgrading software, be absolutely sure to check the precautions to be observed, and
follow the instructions.
 Use the files specified by Panasonic Connect Co., Ltd. as the software used for version upgrading.
 Do not turn off the unit's power while a software version is being upgraded. (Message will appear to indicate that the
process is complete.)
 While a software version is being upgraded, do not attempt to execute any other operations until the version has
been upgraded.
 Close the web browser once after performing a version upgrade.
 If the power is turned off during upgrading, please upgrade once more. In the case the unit may not power on,
please consult your local dealer.
108