Adjusting The Dynamic Range Of The Audio Soundtrack - Marantz DV-12S1 User Manual

ENGLISH
MPEG Out
This player is capable of outputting the MPEG digital
bitstream. When the player is connected to an AV component
that has a built-in MPEG decoder, select the [MPEG] setting.
Otherwise, select [MPEG 3 PCM] to convert the digital signal
to the PCM signal, the digital signal output from a CD.
Audio1 Audio2
Dolby Digital Out –
Linear PCM Out –
MPEG Out - PCM
Digital Out – On MPEG 3 PCM
Move
Settings: MPEG
MPEG 3 PCM*
Digital Out
Depending on your preferences and the type of connections
made, you may opt not to have the digital audio signal output
at all. When this setting is set to [Off] there is no signal output
from the digital audio output jacks.
Make changes to the [Digital Out] setting in the Setup screen Audio
1 menu in the [Expert] menu mode (page 30).
Audio1 Audio2
Dolby Digital Out –
Linear PCM Out –
Digital Out On
Move
Settings: On (Digital signal is output)*
Off (Digital signal is not output)
32
Video Language General
Dolby Digital
DTS Out – Off
Down Sample On
MPEG
SETUP Exit
*
Factory setting
Video Language General
Dolby Digital
DTS Out – Off
Down Sample On
MPEG Out – MPEG 3 PCM
On
Off
SETUP Exit
* Factory setting
Adjusting the Dynamic Range
of the Audio Soundtrack
Audio DRC stands for Audio Dynamic Range Compression.
When Audio DRC is on, soft sounds such as dialog can be
heard more clearly without making loud sounds even louder.
Select from three levels of compression depending on how
much effect you want. When Audio DRC is set to [Off], there is
no effect on the audio source.
Make changes to the [Audio DRC] setting in the Setup screen
Audio 2 menu.
Audio1 Audio2 Video Language
Audio DRC High
Audio Out –
Medium
Speaker Setting Low
Gain Setting – Off
CD Digital Direct – Off
Move
Settings: High
(maximum compression of audio source)
Medium
(moderate compression of audio source)
Low
(very little compression of audio source)
Off*
Note
Audio DRC is only effective with Dolby Digital audio sources.
– DVD
General
Exit
SETUP
*
Factory setting