Table of Contents
Advertisement
Adjusting
Audio and
Video Settings
Using the Setup Screen
Menus
The procedure on this page describes how to operate the
menus on the Setup screen. These menus are used to set and
adjust a number of system settings. The various functions that
can be adjusted are covered throughout this manual. The
procedure on this page provides a basic outline for using the
Setup screen menus.
When setting up for the first time
It is recommended to set up player using the Setup Navigator
(page 20). If you selected [Auto Start Off] when the Setup
Navigator appeared, you may still set up the player using the
Setup Navigator in the General menu screen.
If you choose not to use the Setup Navigator, be sure to make
the necessary settings in the Setup screen
Audio 1, Audio 2, Video, and Language menus as described
on the following pages.
Some DVDs start playing automatically when loaded in the
player. If a DVD has been loaded, be sure to press STOP 7
before proceeding.
OPEN/CLOSE
DISPLAY
F.MEMO
A-B
REPEAT
ANGLE
SUBTITLE
TOP MENU
ENTER
RETURN
1
2
4
5
7
8
SEARCH
0
CLEAR
RC-12DVS1
1
DVD PLAYER DV-12S1
VIDEO ON/OFF
DIMMER
RANDOM
V-PART
DVD
192kHz
POWER
AUDIO
96kHz
GRP
TRK
DOLBY D
TITLE
DIG OFF
CHP
TEMAIN
STANDBY
POWER
VIDEO ADJ.
PROGRAM
AUDIO
MENU
3, 4, 5, 6
SETUP
2
3
6
9
+10
LAST MEMO
CONDITION
MEMO
PLAY
STOP
PAUSE
OPEN/CLOSE
PROGRESSIVE
LAST MEMO
CONDITION
TOTAL
VIDEO OFF
DOWN MIX
L
C
R
FL OFF
LFE
LS S RS
1
Press POWER on the front panel.
2
Press SETUP.
The Setup screen appears.
(Example)
Audio1
Audio2
Video
Dolby Digital Out – Dolby Digital
DTS Out – Off
Linear PCM Out – Down Sample On
MPEG Out – MPEG 3 PCM
Digital Out – On
Move
3
Move the cursor control joystick right or left to
select the menu you want.
As each menu is selected with the cursor, the settings
appear below the menu heading.
4
Move the cursor control joystick down to enter
the menu.
The top item within the menu becomes highlighted.
(Example)
Audio1
Audio2
Video
Dolby Digital Out
DTS Out -
Linear PCM Out – Down Sample On
MPEG Out – MPEG 3 PCM
Digital Out – On
Move
5
Move the cursor control joystick up or down to
select the setting you want to change.
The options available for each setting appear to the right
when the setting is selected. The current setting appears
with the setting indicator lit.
6
Move the cursor control joystick right to enter
the setting options.
(Example)
Audio1
Audio2
Video
Language
Dolby Digital Out
DTS Out -
Linear PCM Out – Down Sample On
MPEG Out – MPEG 3 PCM
Digital Out – On
Move
ENTER
• Not all menu options can be changed while a disc is
playing. In these cases, the options appear grayed out
on the screen and cannot be adjusted. To change
these settings, press STOP 7 first before pressing
SETUP.
• Operating the menu after pressing STOP 7 may
cancel the resume function.
• Some menu options are not immediately effective if set
while a disc is playing. To make these settings
effective, stop playback and then start again, or
change the settings while the disc is stopped.
ENGLISH
Language
General
Exit
SETUP
Language
General
Dolby Digital
Dolby Digital 3 PCM
Exit
SETUP
General
Dolby Digital
Dolby Digital 3 PCM
Select
SETUP
Exit
continued
29
Advertisement
Table of Contents
