Table of Contents
Advertisement
The BBIC detects this level and "
- Power Down
Battery voltage: V(Batt)
The BBIC detects this level and power down.
Refer to
Adjustment (Handset)
23.5. Speakerphone and Headset Jack
The hands-free loudspeaker at SP+ and SP- is used to generate the ring alarm. IC2 is used to
switch off the telephone loudspeaker and is used to amplify the signal to drive the hands-free
loudspeaker. They are selected using the SP_AMP line from pin 70 of the BBIC. 2.5mm headset
jack is also available.
24. CIRCUIT OPERATION (CHARGER UNIT)
24.1. Power Supply Circuit
The power supply is as shown.
25. SIGNAL ROUTE
2.2V ± 50mV
().
73
" starts flashing.
Advertisement
Table of Contents
