Panasonic KX-TCD510ALV Service Manual page 50

- PC which runs in DOS mode.
- Batch file for PC setting: PQZZTCD510AL
13.2. PC Setting
13.2.1. Connections
13.2.2. PC Setting
1. Open a window of MS-DOS mode from the start-up menu.
2. Change a directory.
3. Type "SET_COM 1" from the keyboard (when COM port 1 is used
for the connection).
4. Type "doskey".
Note:
See the table below for frequently used commands.
Command name
rdeeprom Read the data of EEPROM
readid Read ID (RFPI)
writeid Write ID (RFPI)
setfreq adjust Frequency of RFIC
Getchk Read checksum
Wreeprom write eeprom
14. ADJUSTMENTS (BASE UNIT AND CHARGER
UNIT)
Function
Type "rdeeprom 00 00 FF", and the data
from address "00 00" to "FF" is read out.
Type "readid", and the registered ID is
read out.
Type "writeid 00 18 E0 0E 98", and the
ID "0018 E0 0E 98" is written.
Type "setfreq nn".
Type "getchk".
Type "wreeprom 01 23 45". "01 23" is
address and "45" is data to be written.
50
Example