Booster Mode To Harness Mode - Britax ONE4LIFE CLICKTIGHT User Manual

16� Roll the remaining harness
adjuster strap.
17� Tuck the remaining
harness adjuster strap
into the front of the cover.
18� Close the CLICKTIGHT.
19� Flip down the headrest
cover back and reattach
fasteners.

Booster Mode to Harness Mode

1� Flip the headrest cover up.
2� Fold top of the seat pan cover
with vented side over.
3� Pull the harness straps from
the space in-between the
back of the shell and the
back-top part of the seat pan.
40
Table of Contents
4� Remove buckle tongues
from comfort pads.
Reattach comfort pads
above chest clip.
5� Open the chest clip.
6� Flip the seat pan cover up.
Pull the harness strap from
underneath the seat pan
cover and route the harness
straps through the seat pan
cover slots and reattach
fasteners.
7� Flip the headrest cover
back down.
8� Pull the harness straps from
underneath the headrest
cover and route them
through the headrest cover
slots. Reattach fasteners
from headrest cover.
9� Open the CLICKTIGHT.
10� Remove bellypad and
buckle from storage.
11� Install the buckle by turning
its metal bracket sideways
and routing it through the
desired seat cover and slot
in the CLICKTIGHT. Refer
to adjusting buckle position
page 12.
12� Remove harness adjuster
strap from the front seat
Seat Pan Cover
cover.
13� Close the CLICKTIGHT.
Table of Contents
41