Table of Contents
Advertisement
JUICE EXTRACTOR TROUBLESHOOTING
Problem:
Juice extractor does not turn on
The juice extractor stops running
Juice flow is slow
Unit is on but juice/pulp not flowing
Check to see if the locking clamps are
properly engaged.
(See Assembly Instructions, page 6.)
Turn to HIGH to start juicing.
The motor could have overheated.
The resettable fuse, which protects the motor
if overloaded, may have been tripped.
When this happens, reset the appliance by un-
plugging it and letting it cool for a minimum
of 15 minutes. Then, reduce the contents or
clear any jams. Restart the unit as noted in the
operating directions.
Excess pulp in mesh filter basket can slow juice
rate. Stop the juice extractor and clean filter
basket.
Make sure the mesh filter basket/blade is in
place.
Ensure the juice spout is in the open position for
the juicer to flow.
10
Solution:
Advertisement
Table of Contents
