Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Dancover TITAN Peak 240 4,2
Summary of Contents for Dancover TITAN Peak 240 4,2
- Page 1 Manual Greenhouse TITAN Peak 240 4,2 -0 -202...
- Page 2 any length multiple of 2.1 width min 4.2 m 4,15 m; 4,61 m...
- Page 3 Technical certificate Technical certificate PARAMETERS OF PACKAGES ПАРАМЕТРЫ ПАКЕТОВ Тable 2 Perform assembling and operation of the greenhouse in strict accordance with the manual and operating rules stated in the technical certificate. Please keep content dimensions,mm weight. no more kg this technical certificate for further reference.
- Page 4 Technical certificate Technical certificate Extra package base Тable 3 DETAILED PARTS LIST “FRAME” (4.2 M) Таблица 4 Ridge shape 2,10 Top draw band 6,76 marking name length (m) quantity (pcs) Bottom draw band 0,60 6 PACKAGE TITAN Peak 240 Top arc base sheet 0,83 Stay brace 1,98...
-
Page 5: Warranty Liabilities
Technical certificate Technical certificate Extra package insert RULES OF OPERATION Ridge shape 2,10 Top draw band 6,76 Bottom draw band 0,60 The greenhouse should be serviced in the winter period. The greenhouse has Top arc base sheet 0,83 durability under the action of snow loads way more than is required for greenhouses, Bottom arc base sheet 2,91 but less for some snow areas in comparison with the general construction standards. -
Page 6: Installation Sequence
Manual Manual “TITAN Peak 240” GREENHOUSE INSTALLIATION MANUAL INSTALLATION SEQUENCE Introduction Stage name page The general view of the frame is presented in . The frame is assembled from End wall assembly 12-13 the shape numbered parts. Medium shape shelves are facing the covering.. Installation of runners on the end wall Some parts have free holes Indexes:... - Page 7 Manual Manual GENERAL VIEW OF THE GREENHOUSE FRAME WITH EXTENDING GENERAL VIEW OF THE GREENHOUSE FRAME WITH EXTENDING INSERTS INSERTS Г И А Б В 2к А К Б укос В Г Д Е укос укос Д Ж Е Fig 1 General view of the greenhouse with two inserts, total length is 8.4 m.
- Page 8 Manual Manual INSTALLATION SEQUENCE INSTALLATION SEQUENCE STAGE 1 Assembly of the end wall is carried out fig. 1.8 А according to the fig. 1.1.. General view of the end Д Б А wall and location of the Г angles for fastening of bolt М6х14 polycarbonate.
- Page 9 Manual Manual INSTALLATION SEQUENCE INSTALLATION SEQUENCE STAGE 3 STAGE 5 fig. 5.1 End section installation Assembly of the power arc Assembly of the power In the variant of arc is carried out in a installation of the horizontal plane similar to greenhouse without a fig.
- Page 10 Manual Manual DOORS ASSEMBLY INSTALLATION SEQUENCE STAGE 7 А STAGE 6 Б Doors assembly. 13-д Extension of the frame length. В Doors are assembled in Е 14-д the same way. Joints are Assembled power arc (or already been connected, shown in the figures. 13-д...
- Page 11 Manual Manual DOORS ASSEMBLY DOORS ASSEMBLY 14-д Г 12-д-л 13-д 14-д Д Fig. 7.1 Arrangement of 13-д angles for fastening 12-д-п of polycarbonate on the doors. Е 12-д-п П-12-д-п screw screw STAGE 8 Installation of covering Ж Install honeycomb polycarbonate with a specified side facing outwards 12-д-л...
- Page 12 Manual Manual CUTTING LIST OF COVERING OF AN END CUTTING LIST OF COVERING OF AN END 2100 2100 Reminder Reminder 1520 1550 Ridge Ridge Ridge Ridge Ridge Ridge Ridge Ridge 1303 1770 1303 1062 door door door door door door door door...
- Page 13 Manual Manual FASTENING OF COVERING FASTENING OF COVERING Fig. 8.6 washer 32х6,3 Fasten the pieces of covering on the end to 2к, 2кн - places of fastening the angles with the use of of door seals. washers and self-tapping self-tapping screw places screws (fig.8.3).
- Page 14 Manual Manual FASTENING OF COVERING FASTENING OF COVERING First install all the joining plates and tingles on arcs small arc base sheet Arc base bolt М6х14 sheet tingle Do not tighten up! nut М6 bolt М6х14 bolt М6х20 (from the base package) washer 32х6 (from the base package) ) outermost...
- Page 15 Manual Manual FASTENING OF COVERING FASTENING OF COVERING Top draw band шайба 32х6 (из основного пакета) Top draw bolt М6х20 band main shape (from the base tingle washer 6 bottom package) (from the base draw package) band nut М6 bolt М6х14 (from the base package) straighten the...
-
Page 16: Contact Information
Contact information Austria Belgium Croatia Denmark Estonia Finland France Germany Ireland Italy Latvia Lithuania Nederland Norway Poland Portugal Spain Sweden Switzerland For more information please visit: www.dancovershop.com...
Need help?
Do you have a question about the TITAN Peak 240 4,2 and is the answer not in the manual?
Questions and answers