Installation
Piping
Piping of sample inlet/outlet
Note
When connect a soft tube, use the nipple (12 mm) of the accessory.
1. There is Rc1/4 screw on the sample inlet. For the
plumbing, attach a suitable joint.
2. There is Rc1/4 screw on the sample outlet. For the
plumbing, attach a suitable joint. The plumbing should
be atmosphere opening which the tip does not rise.
KCl tank
1. Fill the KCl tank with 3.33 mol/L of KCl solution.
HORIBA #300 KCl solution is available.
2. Loosen the plug to pour the KCI solution in the holder
and fasten it.
6
KCl tank
Sample
outlet
Sample inlet
Drain