Table of Contents
Advertisement
Light Frame / Light Parts List
Fig. 1
Assembly of the Light Frame and Light Fixture
1.
Unfold the Light Frame Assembly until it is a U-Shape.
2.
Slide over the uprights until the frame is flush with the Upright Post, See Fig. 1.
3.
Tighten the knob on the back of the light frame, See Fig. 2. Note, the male plug will need to be installed in the
upright with the female outlet at the top, see Fig. 1 and Fig. 2.
4.
Using the 1/4" x 2" screw that is provided with the light, attach the light fixture to the Light Frame crossmember.
There are 2 holes in the cross member of the light fixture to attach the light to.
5.
Clip the powder cord into the plastic clips.
6.
This completes the assembly of the Light Frame and Light Fixture.
THIS DOCUMENT IS CONFIDENTIAL AND PROPRIETARY
BP-LF48 - Light Frame, 90°, 48"
Fig. 2
PART NO. 1000590
1/4" x 2" Mounting Screw
Fig. 4
Fig. 3
12
Advertisement
Table of Contents
