Table of Contents
Advertisement
Bench Uprights Parts List
Assembly of Uprights
1.
Set Upright on bench top with the bracket tight up against the wood top and flush to the end. See Fig. 1
2.
Using the 1/4" screws, install the screws until tight against wood top. If you have Bin Rails, you can check the
spacing of the uprights by installing (1) Bin Rail.
3.
Using a 5/32" drill, drill a hole 3/4" deep into the top using the (2) holes on the bracket on the top surface of the
wood top.
4.
Install
1000327(Screw #14 x 1) using a cordless drill and a 1/4" driver. DO NOT OVERTIGHTEN.
D
5.
Repeat process for remaining upright.
6.
This completes the assembly of the Uprights.
THIS DOCUMENT IS CONFIDENTIAL AND PROPRIETARY
BP-UPB48 - Uprights, 48", power plug, for 1.75" butcher block top.
PART NO. 1000590
10
Fig. 1
Fig. 2
Advertisement
Table of Contents
