Monitor Holder, With Keyboard, Dual Tilt, Vertical Mount - Champion Workbench Series Assembly Instructions Manual

Monitor Holder With Keyboard Tray Parts List
Fig. 1
Assembly of the Monitor Holder With Keyboard Tray
1. Slide over the uprights until the unit is in the desired position, See Fig. 1.
2. Tighten the knob on the back of the unit, See Fig. 1.
3. Adjust the tension of the fasteners as needed to hold the Monitor and Tray in the desired position.
4. This completes the assembly of the Monitor Holder With Keyboard Tray.
THIS DOCUMENT IS CONFIDENTIAL AND PROPRIETARY
BP-MHLK - Monitor Holder, With Keyboard, Dual
Tilt, Vertical Mount
Knob
BP-UPB48 - Upright Post
PART NO. 1000590
13