Mocka Sonata Assembly Instructions

Change table

Sonata Change Table

Assembly Instructions

Thank you for your purchase.

Please follow the instructions below for correct assembly.

mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

WARNING:

Any furniture that is not anchored to a wall has the potential to tip

over in certain circumstances, i.e. if a child attempts to climb up on the furniture

or in the event of an earthquake. Accordingly, we recommend that all furniture

is anchored to a wall. We supply a free safety wall anchor with all furniture sold

and we recommend these are used to prevent your product tipping. The fixing

device provided should fit most wall types, but please note that different wall

materials may require different fixing devices from those supplied.

Table of Contents

Need help?

Do you have a question about the Sonata and is the answer not in the manual?

Page 1 The fixing device provided should fit most wall types, but please note that different wall materials may require different fixing devices from those supplied. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
Page 2 (A). Tighten with an Allen Key (B). [4] and [5] and secure with 10 x bolts (A). Tighten with an Allen Key (B). Note: The concave holes should face outwards when assembly. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
Page 3 (C). Use a drill to create a small hole lining up with the safety strap (G). Fasten to wall using 1x wall anchor (F), 1x washer (E) and 1x wall screw (D). Ensure unit is balanced and steady before use. You’re done, enjoy! mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...