Advertisement
Table of Contents
Southport Rattan Décor Stand
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B
left leg
right leg
x1
x1
Hardware Supplied
Phillips screwdriver required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
C
D
E
table
screw
nut
x1
x2
x2
Maximum Weight: 5kgs
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Mocka Southport Rattan Decor Stand
Summary of Contents for Mocka Southport Rattan Decor Stand
- Page 1 Hardware Supplied Maximum Weight: 5kgs Phillips screwdriver required. For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 2 Slide legs [A] and [B] together as shown. Attach legs [A] and [B] together as shown and secure with 2 x screws (D) and 2 x nuts (E). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 3 Place table [C] between legs [A] and [B] as shown. Once assembled lift furniture into place, do not drag. Ensure unit is balanced and steady before use. You’re done, enjoy! mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
Need help?
Do you have a question about the Southport Rattan Decor Stand and is the answer not in the manual?
Questions and answers