Technical Specifications; Diagnostics; Common Operations; Establish Hardware Connection - LAUNCH TECH X-PROG3 Manual

LAUNCH

2.3 Technical specifications

Input voltage
Input current
Working temperature
Storage temperature
Dimension

3 Diagnostics

X-PROG3 diagnostic function supports key programming, engine and gearbox
replacement for various of vehicles, you can retrieve ECU information, read,
erase, and write in for a range of chips as shown in the product options.

3.1 Common Operations

• 3.1.1 Establish Hardware Connection
You need to turn off the ignition and correctly locate the vehicle Data Link
Connector (DLC) so as to perform hardware connection.
You can refer to the table below for hardware connection:
User
Scenario
Key
programming
4
www.diagtools.eu, Pernavas 43A, Riga, Latvia, LV-1009, +37129416069, info@diagtools.eu
12 V DC
500 mA
0 to 50 ℃
- 20 to 70 ℃
39 x 107 x 298 mm
Cable Image
Main diagnostic cable
End A End B
Connect with
Connect
Launch VCI
with
connector
vehicle's
for data
DLC
transmission
X-PROG3
End C
Connect with
3
X-PROG