LAUNCH TECH X-PROG3 Manual page 17

LAUNCH
Note:
• The USB cable shown in below diagram is not included in the packing
list for now, using a USB cable could effectively enhance your data
transmission speed.
• Certain Vehicle gear boxes are connected based on the real chassis
type, for information how to connect the gear box, refer to the
onscreen connection diagram.
• Operating on Gear Box programming
Below procedure shows you how to perform gear box programming for a BMW
using Launch diagnostic product, the procedure contains Gear Box connection
and Erasure of Gear Box data.
1. Connecting the Gear Box.
a. On the programmer function interface, touch EGS System to enter gear
box programming.
www.diagtools.eu, Pernavas 43A, Riga, Latvia, LV-1009, +37129416069, info@diagtools.eu
X-PROG3
13