Caring For Your Scanner - Fuel3D SCANIFY F3D2001 User Manual

Once the flash cool down period is complete the LED will become solid blue and your
scanner will be ready to take the next scan.
Note:
 If the left LED indicator flashes slowly while the target is in range and you are
unable to take a scan please contact support at: fuel3d.zendesk.com.

Caring for your scanner

Properly caring for your scanner will ensure that it continues to produce high-quality
outputs.
Do not:
Drop it
Get it wet
Scratch the lenses
Scratches on the flash or camera glass may effect the scan outputs and could cause the
processing of your scans to fail.
Dirt or smudges on the camera lens glass may also cause issues with processing and result
in undesired outputs.
13
When all LEDs light up you are
ready to scan