Table of Contents
Advertisement
Cameras
The scanner uses a stereo camera set-up located in the center of the scanner.
The central camera is utilized while using the viewfinder.
Tip:
The Trigger Buttons
Ensure that your camera lenses are clean.
The SCANIFY has two trigger buttons located on top of the scanner. Used when taking a
The SCANIFY should be held with the cameras and flashes facing towards the subject.
Tip:
Ensure your hands are not covering the flashes while taking a scan.
Half press the trigger buttons to prepare for scanning.
Note:
Only one trigger is required to be pressed to take a scan. It is recommended
to use both as this helps to stabilize the SCANIFY and reduce the risk of poor
quality scans.
11
Holding the scanner and using the
trigger buttons
Advertisement
Table of Contents
Need help?
Do you have a question about the SCANIFY F3D2001 and is the answer not in the manual?