Table of Contents
Advertisement
Protection against unwanted calls
Deactivating radiation in idle status
Settings
Change (
= activated)
To benefit from the advantages of the setting No Radiation, all registered handsets
must support this feature.
If the setting No Radiation is activated and a handset is registered to the base that
does not support this feature, No Radiation is automatically deactivated. As soon as
this handset is de-registered, No Radiation will automatically be re-activated.
The wireless connection will only be established for an incoming or outgoing call and
the connection will be delayed by about 2 seconds.
In order that a handset can establish a wireless connection with the base station more
quickly for an incoming call, it must "listen" to the base station more often, i.e. scan the
environment. This increases power consumption and reduces the standby and talk-
time of the handset.
When No Radiation is activated, there will be no range display/range alarm on the
handset. Contactability can be tested by attempting to establish a connection.
Press and hold the Talk key
Protection against unwanted calls
Time control for external calls
Date and time have been set.
Enter a time period during which the handset should suspend
ringing to indicate external calls e.g. during the night.
Settings
OK
Ringtones (Handset)
Control
Change . . . then
Switch on/off:
Enter time:
Save:
The time control only applies to the handset for which the setting is configured.
The telephone will continue to ring for numbers that have been assigned to a VIP
group in the directory.
48
OK
ECO DECT
. . . the dialling tone sounds.
OK
Audio Settings
OK
Time
select On or Off
switch between Suspend ring.
from and Suspend ring. until
enter start and end in 4-digit
format
Save
OK
No Radiation
Example
Time Control
For external calls:
On
Suspend ring. from:
22:00
Suspend ring. until:
07:00
Back
Save
Advertisement
Table of Contents
