Gigaset C705 Manual page 21

Establishing a conference call/call swapping
Conduct a call while a second call is being held. Both callers are indicated on the display.
•
Call swapping: use
•
Establish a three-way conference call:
•
End a conference call:
participant use
The other participants end the conference call using the End call key
Accepting/rejecting call waiting
An external call arriving during an internal call is indicated with a call waiting tone. If the number
is transferred, you will see the number or the name of the caller on the display.
•
Rejecting a call:
The call waiting tone is turned off. The call continues to be indicated on the other registered
handsets.
•
Accepting a call:
Internal call waiting during an external call
If an internal participant attempts to call you while you are involved in an external or internal call,
this call is shown on the display (Call Waiting).
•
End display: Press any key
•
Accept the internal call:
The internal call is indicated in the usual way. You can accept the call.
Listening in to an external call
You are conducting an external call. An internal participant can listen in to this call and take part
in the conversation (conference).
The Listening In function must be activated.
Activating/deactivating internal listening in
Settings
Change ( = activated)
Internal listening in
The line is engaged with an external call. Your screen will display information to that effect. You
can listen in to the external call.
Press and hold
Ending listening in
Press . . . all participants will hear a signal tone
to swap between both participants
End Conf. . . . You have been connected back to external
to swap between both participants
Reject
Accept . . . Speak to the new caller, the previous call is placed on hold.
End your current call
OK Telephony
. . . all participants will hear a signal tone
Conf.
OK
Making calls
.
Listening In
21